Selasa, 14 Agustus 2018

Implementing at 8pm on USART using PIC16F877A + MPLAB X

Implementing at 8pm on USART using PIC16F877A + MPLAB X - This phone has everything you’d hope for considering the price. There's the usual set of high-end specs like fast charging, wireless charging, IP68 waterproofing and speedy 4G LTE. Like the S9 Plus, the Note 9 has dual rear cameras with dual aperture and OIS. New technology for the Note 9 specifically includes Flaw Detection and Scene Optimiser, which in simpler terms tell you if you’d taken a blurry photo and selects the best scene mode for the shot. Samsung also launched the Galaxy Watch at the same time, which can be charged alongside the Note 9 on the below Wireless Charger Duo, which is a neat accessory (photo via Gizmodo). home at 8pm on, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about Implementing at 8pm on USART using PIC16F877A + MPLAB X, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:


The Universal Synchronous Asynchronous Receiver Transmitter (USART) module is one of the two serial I/O modules in PIC16F877A. (USART is also known as a Serial Communications Interface or SCI.) The USART can be configured as a full duplex asynchronous system that can communicate with peripheral devices such as CRT terminals and personal computers, or it can be configured as a half duplex synchronous system that can communicate with peripheral devices such as A/D or D/A integrated circuits, serial EEPROMs etc.

5 Registers are used for USART in PIC16F877A and they are 

  • TXSTA - Transmit status and control Register
  • RCSTA - Receiver status and control Register
  • TXREG -USART Transmit Data Register 
  • RCREG - USART Receive Data Register
  • SPBRG - Baud Rate Generator Register
Steps to follow when setting up an Asynchronous Transmission
1.Initialize the SPBRG register for the appropriate baud rate. If a high speed baud rate is desired,
set bit BRGH .
2. Enable the asynchronous serial port by clearing bit SYNC and setting bit SPEN.
3. If interrupts are desired, then set enable bit RCIE.
4. If 9-bit reception is desired, then set bit RX9.
5. Enable the reception by setting bit CREN.
6.Flag bit RCIF will be set when reception is complete and an interrupt will be generated if enable bit RCIE is set.
7. Read the RCSTA register to get the ninth bit (if enabled) and determine if any error occurred during reception.
8. Read the 8-bit received data by reading the RCREG register.
9. If any error occurred, clear the error by clearing enable bit CREN.
10. If using interrupts, ensure that GIE and PEIE (bits 7 and 6) of the INTCON register are set.

To start programming in MPLAB X follow the steps as in the :  Blinking a LED using MPLAB X , PIC16F877A

up to 9th step same as in  Blinking a LED using MPLAB X , PIC16F877A

The main program have a change according to the steps for Asynchronous Transmission
#########################################################################


/* Asynchronous Transmission in  PIC16F877A
 * File:   main.c
 * Author: ebin
 *
 * Created on 10 September, 2012, 11:39 AM
 */

#include <htc.h>

#if defined(WDTE_OFF)
__CONFIG(WDTE_OFF & LVP_OFF);
#elif defined (WDTDIS)
__CONFIG(WDTDIS & LVPDIS);
#endif
int main(void)
{
    TRISC6 = 0;
    TRISC7 = 1;
    SPBRG = 25 ;
    BRGH =1 ;
    SPEN =1 ;
    SYNC = 0 ;
    CREN =1 ;
    TXEN =1;
    

    while (1)
    {
        TXREG ='A';
        while(TXIF == 0);
        TXIF=0;
    }
 return 0;
}


##############################################################################
TECHNO NEWS
https://ikkemunandar.blogspot.com/
How to Automatically Shrink url of ADF.ly || Earn Money By ADF.ly
https://ikkemunandar.blogspot.com/2013/12/how-to-automatically-shrink-url-of.html
4 Steps Hacking Jcow Social Networking Web Server via Arbitrary Code Execution
https://ikkemunandar.blogspot.com/2016/01/4-steps-hacking-jcow-social-networking.html
ATF Box Full Crack Tool Without Box Flashing For All Nokia
https://ikkemunandar.blogspot.com/2016/01/atf-box-full-crack-tool-without-box.html

Tidak ada komentar:

Posting Komentar